 |
 |
 |
 |
Designed for mid-range tractor horsepowers
The MASTER 122 ploughs have been designed to meet your requirements for a versatile machine which is both easy to use and strong enough to meet the demands of today’s average sized farm.
This plough range is available from 3 to 6 furrows in both MULTIMASTER and VARI-MASTER versions and in either traction bolt or non-stop hydraulic. It’s technical
characteristics and different equipment options make these ploughs adaptable to all
situations. |
|
Working width adjustments on
the Multi-Master 122
Multi-Master: 14”, 16” and 18” by
moving bolts to the required width setting
hole. |
 |
|
Easy adaptation for all tractor inter-tyre distances
Depending on tractor type, the plough is
pre-set for three ranges of tyre spacing:
1.15m-1.35m, 1.30m-1.50m and
>1.45m. This adjustment is required
only once for your tractor and ensures
optimum use of the engine power available. |
 |
|
Working width adjustments on the Vari-Master 122
12” to 18” in 90cm point to point and 12” to 20” in 102cm point to point. The working width is changed
hydraulically from the tractor cab. The correction of the front furrow and plough aligning settings are carried out automatically as the width changes.
For plough turnover the plough bodies fold up automatically to their narrowest width for the maximum possible ground clearance. After turnover the plough returns to the memorised working width. |
 |
|
Designed for intensive use.
The MASTER 152 ploughs have been designed to meet the same demands as the 122 range but for more intensive use, more difficult work conditions and higher horsepower tractors.
The 152 ploughs are available from 3 to 6 furrows in MULTI-MASTER and VARI-MASTER in either traction bolt or non-stop hydraulic. The strength, simplicity and
different options available make the plough fully adaptable to your needs. This range also features the possibility to assemble diamond bodies, particularly useful where
wide tyres are fitted to the tractor. |
|
1. Reduction of draft force of up to 20%
Substantial reduction in fuel consumption, due to the different soil turnover characteristics of Diamond bodies. |
|
2. Wide furrow-bottom
Allows the use of wide tractor tyres to increase traction, and reduce compaction.
Reduced wear of tyre walls. |
 |
|
Multiple working widths on the Multi-Master 152
A change in working width to 14”, 16” or 18” whether in traction bolt or nonstop hydraulic is quickly carried out by pivoting the plough leg support on the beam and placing the bolt in the
corresponding width setting hole. |
 |
|
Working width adjustments on the Vari-Master 152
12” to 20” in 102cm point to point. The
working width is changed hydraulically
from the tractor cab. The correction of the
front furrow and plough aligning settings
are carried out automatically as the width
changes. For plough turnover the ploughs
bodies fold up automatically to their
narrowest width for the maximum
possible ground clearance. After turnover
the plough returns to the memorised
working width. |
 |
|
|
| |
